This equipment is mainly used for automatic stamping of aluminum plastic film.
technological process:
The aluminum-plastic film is loaded in the whole roll, the air expansion shaft is fixed, the floating roll has constant tension and takes the initiative to feed. Before stamping, the discharge belt has the function of piercing the top edge. The die is a three piece die structure, the gas-liquid booster cylinder controls the flat pressing function, the servo mechanism stretches, the top edge is finely trimmed with the function of secondary trimming, the waste edge is repaired automatically, and the material is fed in the way of rear pulling. The products are collected manually, and can be cut automatically when one is out and two are out.
产品中心 自动冲壳机 顶侧封机 自动贴膜机 注液线 热冷压机 真空二封机 实验室专用设备
联系我们
电话:0769-2224 4686
传真:0769-8158 5335
邮箱:zeheng@gdzeheng.com
地址:广东省东莞市东城街道金玉岭路7号2栋101